Designed for the Palma or long-range shooter. A single shot cylindrical action, a version of the model P Action with customized bolt and port configuration.
The bolt carries three forward locking lugs, is equipped with a Sako style extractor and can be supplied to accept any case rim up to 0.534"(standard magnum rim). It undergoes finish machining after hardening, and is hand lapped to its mating receiver.
The receiver is of 4340 chrome/moly/nickel steel through hardened to 38Rc and finish machined after surface hardening to ensure concentricity.
Comes standard with a bolt face plunger type ejector. Non Ejector option can be included when an action is being ordered Note this option is only available with the twin port configurations.
- Right Bolt / Left Port
- Left Bolt / Right Port
- Twin Port / Right Bolt
- Twin Port / Left Bolt
For True Right Hand & Left Hand configurations see the Model P.
Supplied as standard with the Barnard Target trigger.
- A Remington type lug between receiver and barrel.
- Use of a recoil spigot from the action (1/4" X 28 cap screw with the head machined concentric) which fits into a steel bushed hole in a 6061 aluminum bedding block that has been machined to provide 2 parallel points of contact on the action.
Model PC Details
|Receiver Length||200mm (7.85")|
|Receiver Diameter||37mm (1.457")|
|Bolt Diameter||22mm (0.866")|
|PC "standard" Action weight||1.307kg / 46.103oz (with trigger 1.406kg / 49.595oz)|
|PC "Twin port" Action weight||1.224kg / 43.175oz (with trigger 1.322kg / 46.632oz)|
|Loading Port Length||75mm (2.95")|
|Barrel Thread||1 1/16" UNF X 16TPI|
|PC "Standard" Bolt Face||.308 / .534 Magnum|
|PC "twin port" Bolt face||.223/ .308/ .534 MAGNUM|
|Striker Tip Diameter||1.6mm (.062") standard|
|Lock Time||1.7 milliseconds - calculated|
|Sight Mounting||Drilled & tapped (M4) for most sights|
eg CENTRAL, REDFIELD, RPA, WARNER.or our full length sight rails
|Action Mounting||1/4" UNF Cap Screws|