Last Updated: September 18, 2026
The information provided by Whidden Gunworks on www.whiddengunworks.com (the "Website") is provided for general informational, educational, and commercial purposes. By accessing or using this Website, you acknowledge and agree to the terms of this Disclaimer.
Whidden Gunworks makes reasonable efforts to provide accurate and current information. However, we do not guarantee that all information available through the Website will always be complete, accurate, current, or free from errors.
1. General Information Disclaimer
Information provided on the Website is intended to help customers learn about Whidden Gunworks, our products, services, firearms, shooting equipment, reloading equipment, accessories, and related topics.
Website content should not be considered a substitute for professional instruction, manufacturer documentation, published technical data, legal advice, or appropriate firearms and reloading training.
Your use of information obtained through the Website is at your own discretion and responsibility.
2. Firearms Safety
Firearms are inherently dangerous and can cause serious injury or death if handled, stored, maintained, modified, or used improperly.
Anyone handling or using a firearm should follow established firearm safety practices, manufacturer instructions, range rules, and all applicable federal, state, and local laws.
Users are responsible for obtaining appropriate firearms training and for understanding the safe operation of any firearm or firearm-related product they own or use.
Always verify that a firearm is unloaded before performing maintenance, installing components, making adjustments, or performing other work unless the applicable procedure specifically requires otherwise and is being performed by a properly qualified individual.
3. Reloading Disclaimer
Reloading ammunition involves inherent risks. Improper reloading practices can cause excessive pressure, firearm damage, property damage, serious personal injury, or death.
Any information concerning ammunition reloading, cartridges, dies, bullets, primers, powders, cartridge cases, measurements, pressures, velocities, or related subjects that appears on this Website is provided for general informational purposes.
Reloaders should use current, reputable, published reloading manuals and load data supplied by established powder, bullet, component, and equipment manufacturers.
Do not exceed published maximum loads. Always begin with appropriate published starting loads and follow established safe reloading practices.
Whidden Gunworks does not control the components, equipment, firearms, loading techniques, environmental conditions, measurements, or other variables involved when an individual reloads ammunition. Users assume responsibility for determining that their ammunition, components, equipment, and reloading practices are appropriate and safe.
4. Technical Information
Technical information provided through the Website may include measurements, specifications, instructions, recommendations, product applications, compatibility information, shooting information, reloading information, or other technical material.
Although we make reasonable efforts to provide useful and accurate information, specifications and technical information may change because of product revisions, manufacturing changes, new information, component differences, or other factors.
Users should verify important technical information using current manufacturer documentation and other appropriate authoritative sources before relying upon it.
5. Product Compatibility
Not every firearm component, die, tool, accessory, or other product is compatible with every firearm, cartridge, component, or application.
Customers are responsible for verifying product compatibility before purchasing, installing, modifying, or using a product.
If you are uncertain whether a product is appropriate for your firearm, cartridge, equipment, or intended application, contact Whidden Gunworks or an appropriately qualified professional before using the product.
6. Product Information and Specifications
Whidden Gunworks makes reasonable efforts to accurately display product descriptions, photographs, specifications, dimensions, pricing, availability, and other product information.
However, typographical errors, incorrect specifications, outdated information, photographic differences, or other inaccuracies may occasionally occur.
Manufacturers may also change product designs, materials, specifications, packaging, or features without notice.
Whidden Gunworks reserves the right to correct errors, update information, change product specifications, and modify Website content at any time.
7. Custom Products and Gunsmithing
Information concerning custom products, custom dies, firearm components, modifications, gunsmithing, machining, or other specialized services is provided for general informational purposes.
Results may vary depending on the firearm, ammunition, components, customer specifications, manufacturing tolerances, equipment, environmental conditions, and intended application.
No statement on the Website should be interpreted as guaranteeing a particular level of firearm accuracy, ammunition performance, velocity, competition result, or other performance outcome unless such a guarantee is expressly provided in writing by Whidden Gunworks.
8. Competition and Shooting Performance
References to competition results, accuracy, shooting performance, records, customer experiences, or product performance do not guarantee that another user will achieve the same results.
Shooting performance can be affected by numerous factors, including firearm configuration, ammunition, barrel condition, environmental conditions, equipment, shooter experience, reloading practices, and other variables outside the control of Whidden Gunworks.
9. Legal and Regulatory Information
Information appearing on the Website regarding firearms laws, firearm transfers, Federal Firearms License requirements, shipping restrictions, age requirements, prohibited products, or other legal and regulatory matters is provided for general informational purposes and is not legal advice.
Firearms laws and regulations may change and can vary significantly between states, municipalities, and other jurisdictions.
Customers are responsible for determining whether they may legally purchase, receive, possess, transport, install, or use a particular firearm, component, accessory, or other regulated product in their jurisdiction.
Questions regarding the interpretation or application of a law should be directed to an appropriately qualified attorney or the relevant government authority.
10. Third-Party Products
The Website may contain information about products manufactured or supplied by third parties.
Product names, trademarks, specifications, warranties, instructions, and other information associated with third-party products remain subject to the applicable manufacturer's or supplier's terms and documentation.
Whidden Gunworks is not responsible for unauthorized modifications to third-party products or for the use of those products in a manner inconsistent with manufacturer instructions.
11. Third-Party Websites and Links
The Website may contain links to third-party websites, manufacturers, organizations, videos, social media platforms, payment providers, shipping providers, or other external resources.
These links may be provided for convenience or informational purposes. Whidden Gunworks does not control third-party websites and does not guarantee the accuracy, availability, security, policies, products, services, or content provided by third parties.
Visiting or using a third-party website is subject to that website's own terms, privacy policies, and practices.
12. Testimonials and Customer Experiences
The Website may contain testimonials, reviews, photographs, competition results, or descriptions of experiences submitted by customers or other individuals.
These statements reflect the experiences or opinions of the individuals providing them and do not guarantee that every customer will experience identical or similar results.
13. Website Availability
Whidden Gunworks does not guarantee that the Website will always be available, uninterrupted, secure, or free from technical problems.
The Website may occasionally be unavailable because of maintenance, software updates, server issues, security measures, third-party service interruptions, network problems, or circumstances outside our reasonable control.
14. No Professional Advice
Nothing published on the Website constitutes legal, medical, financial, engineering, or other professional advice.
Technical information relating to firearms, ammunition, reloading, shooting, or related equipment should be considered together with appropriate manufacturer instructions, established safety practices, current published data, and qualified professional guidance when appropriate.
15. Assumption of Risk
Firearms, ammunition, ammunition reloading, shooting activities, and the installation or modification of firearm components involve inherent risks.
Users are responsible for understanding these risks and for using appropriate safety procedures, equipment, training, and judgment.
Purchasing a product from Whidden Gunworks does not eliminate the user's responsibility to safely and lawfully install, maintain, store, transport, and use that product.
16. Limitation of Liability
To the fullest extent permitted by applicable law, Whidden Gunworks will not be responsible for indirect, incidental, special, consequential, or punitive damages arising from reliance upon Website information, improper use of a product, unauthorized modifications, improper installation, unsafe reloading practices, failure to follow manufacturer instructions, or other circumstances outside the reasonable control of Whidden Gunworks.
Nothing in this Disclaimer is intended to exclude or limit liability that cannot legally be excluded or limited under applicable law.
17. No Warranties Regarding Website Content
To the fullest extent permitted by applicable law, Website information is provided on an "as is" and "as available" basis without warranties regarding its completeness, accuracy, availability, or suitability for a particular purpose.
Any warranty applicable to a particular Whidden Gunworks product or service will be governed by the specific warranty terms associated with that product or service.
18. Terms of Service
Your use of the Website is also governed by the Whidden Gunworks Terms of Service. The Terms of Service contain additional provisions concerning Website use, purchases, firearm transfers, restricted products, orders, payments, intellectual property, limitations of liability, and other matters.
19. Privacy
Your use of the Website is also subject to the Whidden Gunworks Privacy Policy, Cookie Policy, and applicable Privacy Settings.
Please review these policies for additional information regarding how information may be collected, used, stored, and managed when you use the Website.
20. Changes to This Disclaimer
Whidden Gunworks may modify or update this Disclaimer as our Website, products, services, business practices, or applicable requirements change.
Changes will be posted on this page with an updated "Last Updated" date where appropriate.
21. Contact Information
If you have questions regarding this Disclaimer or information provided through the Website, please contact:
Whidden Gunworks
PO Box 969
Nashville, GA 31639
United States
Phone: (229) 686-1911
Email: [email protected]
Website: www.whiddengunworks.com